Mine Safety Appliances
Singapore
Select Region
Corporate Home
Africa
Asia Pacific
Europe
Latin America
Middle East
North America
MSA is the global leader in the development, manufacture and supply of sophisticated products that protect people's health and safety.
Customer Service
+656 776 1633



The Safety Company



Related Resources
Logo Express - Customizing Helmets

Regulatory Information

Warranty Information

Ask a Question

Have Someone Call Me

Asset Library

 
Visors
HOME | SINGAPORE CATALOG | HEAD, EYE, FACE & HEARING PROTECTION | V-GARD HELMET ACCESSORIES | Visors

Printable Version of This Page
Email This Page

Enlarge Image





Approvals & Standards
Except as noted, MSA visors meet or exceed impact requirements of ANSI/ISEA Z87.1.

Applications
Agriculture
Chemical
Construction
Electric Utility
Mining
Nuclear
Oil and Gas
Paper & Pulp
Sanding & Grinding
Welding

Hazards
Particulate and Dust
Splash

Product Information
Choose from a wide variety of visors that fit MSA faceshield frames. MSA visors are manufactured for use ONLY on MSA frames and assemblies in order to comply with ANSI/ISEA Z87.1.

Visors should always be worn with eye protection, such as goggles or spectacles, that meet ANSI/ISEA Z87.1 requirements for high impact. Visors should be inspected frequently and replaced immediately if worn, scratched, or damaged in any way. Selection of proper models for specific hazards and communication of all instructions, precautions, and limitations to the wearer is the responsibility of user safety specialists, who are also responsible to see that they are strictly observed. Failure to comply with any of the above could result in serious injury or death.

WARNING
Basic, non-impact visors should never be used where an "Impact Protector" is required. A hazard assessment should always be done before using basic, non-impact protectors.

CAUTION
Clean visor with mild soap and water only. Cleaning dry or with coarse cloth will scratch the visor.

WARNING
Do not use MSA visors for welding, elevated temperature applications, or for protection against other infrared radiation sources unless the MSA visor is approved for such applications. Do not use for sports, simulated war games, paintball games, or similar activities. A pitted or scratched visor reduces eye protection and vision. Inspect routinely and replace worn or damaged parts immediately. Do not alter or modify this product. Do not use near open flame. Failure to follow these warnings can result in permanent impairment of sight, other serious personal injury, or death.

Basic Info
Additional Product Information
  • ANSI Update - Head Protection
  • Bulletin - MSA Hard Hat Accessories Compatibility Chart (Bulletin No. 0602-30)
  • Bulletin - Rebuilding America (Bulletin No. 5555-393)


Literature
Ordering Information
Visors
Visors
Polycarbonate Visors  Size (inches)  Part No.

Clear (Molded) 

10 x 20 x .060  10063106

Clear (Formed) 

8 x 16 x .040  488131
Clear (Formed)  8 x 16 x .060  488132
Clear (Flat)  8 x 15-1/2 x .040  10017934*
Clear (Formed)  8 x 19 x .060  488138
Clear (Formed)  6 x 16 x .060  491908

Clear (Fog-free) 

8 x 16 x .040  802337

Propionate Visors (Molded) 

Size (inches)  Part No.
Clear ANSI/ISEA Z87.1 basic, non-impact protector 8 x 15-1/2 x .060  10109107

Dark Green ANSI/ISEA Z87.1 basic, non-impact protector

8 x 15-1/2 x .060  10109019

Shade 3 (Green) – ANSI/ISEA Z87.1 basic, non-impact protector

8 x 15-1/2 x .060  10086996
Shade 5 (Green) – ANSI/ISEA Z87.1 basic, non-impact protector 8 x 15-1/2 x .060  10005882
Nitrometer Visors and Chinguards
Visors  Size (inches)  Part No.
Clear polycarbonate (Formed)  6 x 16 x .040  488126
Clear polycarbonate (Formed, Fog-free)  8 x 19 x .060  494916

Shade 5 Green, propionate – ANSI/ISEA Z87.1 basic, non-impact protector (Molded, must be worn with chinguard) 

6-1/2 x 15-1/2 x .060  10005881
Chinguards (for Nitrometer Visors)  Part No.
Clear polycarbonate  10022241

Black polypropylene 

10022242
Chinguard, Black polycarbonate (use ONLY with P/N 10005881)  10013631

Wire Screen Visors 

Size (inches)  Part No.

Plastic edge, 20 mesh (not for use in elevated temperatures)–ANSI/ISEA Z87.1 basic, non-impact protector 

6-1/2 x 14  476356

Aluminum edge, 20 mesh (Flat, not for use in areas where splash may occur)– ANSI/ISEA Z87.1 basic, non-impact protector 

8 x 17-1/2  457409

Arc Shield 

Size (inches)  Part No.

For protection from electric arcing. Call for protection level. Meets ANSI/ISEA Z87.1 and NFPA 70E 2009, Classes 1 & 2.

Tinted (light green/brown) complete with chinguard, ANSI/ISEA Z87.1 basic, non-impact protector, 11 Cal/cm2 – propionate (Molded) 

6 x 20 x .060  10063107

Elevated-Temperature 

Size (inches)  Part No.
Clear, polycarbonate (Molded), with gold coating  9-1/2 x 20 x .070  10005879
Clear, polycarbonate (Molded), with 4" gradient-tinted strip  9-3/4 x 18-1/2 x .060  10090325
Medium Green, polycarbonate (molded), with gold coating 9-1/2 x 20 x .070  10005880
* Meets CSA Z94.3


How to Order from MSA:
Click Here

Ordering Info


© MSA 2010. All Rights Reserved. Click to submit Website feedback